Chapter 22

Over ‘40 individual Data Points’ of supportive evidence in support

‘The Parkes Principle of Attraction and Expansion’

Our own sun is the source for the emission of electromagnetic energy for our solar system. This represents Space Saturation (level three) although electromagnetic energy was created a long time before the creation of our solar system. (as in Space Saturation level one)

All scientific evidence collected by NASA on our sun, (from one perspective) proves that it consists of electromagnetic energy. However, the solar wind also consists of all of the particles coming from the sun which makes up Space Saturation (level three).

Solar Panels

The electromagnetic energy emitted from the sun as sunlight comes in the form of many particles from individual particles of electromagnetic energy such as ‘Large, Bright and Hybrid Sub-Parlites’, ‘Large, Bright and Hybrid Parlites’ and ‘Large, Bright and Hybrid Quarks’ just to name a few as well as full wavelengths of electromagnetic energy.

Solar panels then capture and store this electromagnetic energy that is emitted from the sun as sunlight directly into DC batteries or it can be fed straight into the house system to be used by lighting or electrical appliances using an inverter.

Using the right Inverter it can also be directed for use straight into the Electricity Grid.

A Generator

Have you ever wondered where electricity comes from? It seems like a generator can produce electricity magically from thin air. At least that is the general consensus. However, that is not what happens. That is not how we create electricity.

As an example: Have you ever wondered why a portable generator can produce electricity? There is no actual electricity reservoir there. There is a fuel tank to turn the motor, but no tank for the electricity to come from as well as no earth connection.

A generator works by spinning a coil of copper wire inside magnets. However, if we turn that around and put electricity into the coil of copper wire, we get an electric motor. It really is as simple as that.

By injecting electricity into a 'coil of copper wire' inside magnets, the coil spins and we get an electric motor.

By spinning a 'coil of copper wire' inside magnets, we get electricity. So the system itself is either a generator or an electric motor, depending on whether we are giving electricity or taking electricity from the system.

We know where the electricity comes from when we feed the electric motor. But where does the electricity come from when we turn the 'coil of copper wire' the other way. The only explanation possible is that it comes from Space Saturation.

That is why a generator literally proves the existence of the ‘Balls of Dilt’ within the ‘Large, Bright and Hybrid Sub-Parlites’, ‘Large, Bright and Hybrid Parlites’ and ‘Large, Bright and Hybrid Quarks’ from Space Saturation (levels two and three). Because there is no other explanation as to where the electricity comes from when a 'coil of copper wire' is spun around inside magnets.

Also, the closer the magnets are to the coil of wire, the more power created for the same amount of revolutions. This is because more ‘Large, Bright and Hybrid Sub-Parlites’, ‘Large, Bright and Hybrid Parlites’ and ‘Large, Bright and Hybrid Quarks’ are put under pressure at the same time and have their ‘Balls of Dilt’ spark creating more power.

For those who think the electricity comes from the magnets. Think about the alternators of the power stations that have been in use since the 1950’s and are still going strong today. It would be impossible to get that much electricity (60 years worth) out of the magnets and still have the same amount of steel left in the magnets with no deterioration.

If taking electricity out of a piece of steel every minute of every day for 60 years doesn’t change the foundation structure of the steel itself, then common sense says the electricity is not coming from the steel. The magnets of these old power stations are the same size today as they were when they started, so it is clearly not the magnets where the electricity is coming from.

Space Saturation is the reason why a generator can produce electricity. A generator does this by collecting ‘Large, Bright and Hybrid Sub-Parlites’, ‘Large, Bright and Hybrid Parlites’ and ‘Large, Bright and Hybrid Quarks’ from around the magnets and forces them through the system putting them under pressure, (which is the same as lightning) which is what we get out of the power point at the other end to run our electrical appliances.

It was also this process that helped Nikolai Tesla create his famous lightning bolt experiment. In one of his lectures, Nikolai Tesla referred to this extra energy he needed to make his experiment successful as the missing matter in the universe that scientists had been looking for. The elusive dark matter.

DNA

DNA is made of monomers called nucleotides. These nucleotides are the 4 varieties of bases for the DNA known as A.G.C. & T. Also, these bases reflect the order of the 20 different kinds of amino acids, the proteins. Most biologists say if DNA used a code of 4 x 2 bases to 1 amino acid, then this creates a number of only 16 which is far too short of the 20 amino acids. So they went to the next number up which is 4 x 3 bases to 1 amino acid.

Molecular biologists now say that DNA stores a triplet code for making proteins. They believe and assume that these bases use a code of 4 x 3 bases to 1 amino acid which makes up 64 multiple combinations.
*4 x 1 = 4 * 4 x 4 = 16 * 4 x 16 = 64

This in theory they say would easily cover the 20 amino acids. However, this leaves a wide gap in the solution which is a serious miss-calculation and why DNA research is still a hit and miss affair in some cases.

Electromagnetic energy operates on certain principles and equations and it uses those principles to expand. The actual equation of expansion in relation to electromagnetic energy is 2.25 - 1. Everything in life is made up of electromagnetic energy and this means we have to apply the principles of electromagnetic expansion to all of our research.

When we apply this electromagnetic formula for expansion to the DNA, we get 4 x 2.25 to 1 amino acid. This multiplies to the exact number of 20.25 amino acids. The actual number of amino acids in DNA. (hence the double helix) * 4 x 2:25 = 9 * 9 x 2:25 = 20:25

Later on when molecular biologists catch up to the knowledge in this book, they will have to change their theory back to read that DNA stores a double code for making the proteins. This will give them a much more accurate picture of what they are looking at.

Lightning

It is simply pressure that creates lightning. This is evident in thunderstorms; when the pressure of the clouds become great enough, (2.25 - 1 in relation to the pressure of the ‘Crealite’) some of the ‘Balls of Dilt’ within the ‘Crealites’ of some gases end up touching each other again under that pressure and start a chain reaction of sparking to create lightning.

The lightning itself is following the many groups of gas particles. One gas particle is next to another one and then that one is next to another one and so on. Due to the earth being magnetically negative and every particle being magnetically negative, all particles are repelled from the surface and from each other if they are light enough.

When a spark occurs this spark is magnetically positive, this attracts the magnetically negative particles, which continues the sparking until the pressure has been released or the spark reaches particles which have their ‘Balls of Dilt’ too far apart within the ‘Crealites’ to spark any more. (such as the ground)

There are many highly volatile gases in our atmosphere such as methane and oxygen that spark with a small amount of pressure. This type of lightning can be recognised easily as these pockets of gases create lightning which never touches the ground as they are within the magnetic field of the cloud and the electrical earth contact is the magnetic field of the cloud itself. Just like a car chassis is the ground for it’s electrical system.

The main lightning bolts that touch the ground are caused by pressurising gases that require a lot of pressure to ignite and are inside the magnetic fields coming from the ground with the electrical ground contact being the earth itself.

There are also lightning bolts that ricochet off some magnetic fields on to others and create incredible light shows for us to look at.

Erupting volcanoes also produce a lot of lightning under pressure.

Doppler effect

When the source of a wavelength moves relative to an observer, the observer notices a change in the frequency of the wave. This change is called the Doppler effect.

The Doppler effect proves the existence of Space Saturation (level one), because the observer is experiencing the wave vibrations from 'the rotating sea of flux lines of Space Saturation' from different positions within Space Saturation as the starting point of the wavelength. Our ears are limited to a certain range of frequencies as well as a limited amount of energy within that range.

However, when the receiving equipment is not our ears, we can keep detecting the wavelength from great distances because the vibration will continue within 'the rotating sea of flux lines of Space Saturation' indefinitely while the source is still in motion. An example of this is the communications NASA has with it’s voyager and other spacecrafts. It takes a long time for the communication to reach the earth.

Sound Vibrations versus Bright Parlites

The difference between sound vibrations moving through 'the rotating sea of flux lines of Space Saturation' and ‘Bright Parlites’ hitting a surface is that sound vibrations are brand new vibrations within 'the rotating sea of flux lines of Space Saturation' operating at a very different frequency.

‘Bright Parlites’ hitting the surface of an object are actually speeding up the vibrations of the existing standard vibrations that are already moving through 'the rotating sea of flux lines of Space Saturation'.

Microwave oven experiment

‘Balls of Dilt’ spark under pressure and you can see this effect happening intermittently in a very specific experiment. The actual intermittent factor is determined by the pressure release. Place a wooden tooth pick in a microwave oven and set it alight. Then turn the microwave on and see what transpires.

What you will find is that the heat of the microwave combined with the gas and smoke coming off the burning of the tooth pick, creates pressure within the microwave.

The groups of ‘Balls of Dilt’ which make up that same gas and smoke is then effected by the pressure build up. When the pressure reaches just over 2.25 -1 in relation to the pressure of the ‘Standard Crealite’, the groups of ‘Large, Bright and Hybrid Sub-Parlites’, ‘Large, Bright and Hybrid Parlites’ and ‘Large, Bright and Hybrid Quarks’ that make up the gas and smoke and all

other ‘Balls of Dilt’ within the microwave touch each other and spark. To our eyes, what we see is an explosion of light or most people call it a Plasma effect.

As the explosion of light is created, the pressure increases instantaneously and escapes through the vents. Which is in effect (Space Saturation level three). This all happens very quickly and the same process continues again repeatedly until the flame goes out when the tooth pick is finally burned up.

You can actually see a time delay between each explosion of light coinciding with the build up of heat and pressure as the flame becomes small and large respectively between each explosion.

(This is very dangerous. Do not try this at home. Use only a controlled environment.)

Light bulb in a microwave oven

By putting a light bulb in a microwave and turning on the microwave, you will see the pressure build up within the light bulb and actually see light being created as the ‘Balls of Dilt’ within the Crealites inside the light bulb touch each other and spark. As more of the ‘Balls of Dilt’ spark and create a brighter light, the heat and pressure continues to increase until the light bulb finally explodes.

This supports the idea that the ‘Balls of Dilt’ within the ‘Crealites’ are sparking. That they are creating more light as the pressure builds up due to increased sparking and when the pressure is great enough the light bulb finally explodes. The exploding light bulb supports that the pressure and heat is actually building up from the actual microwaves.

The microwaves prove the existence of the ‘Balls of Dilt’ within the ‘Crealites’ within the light bulb, because they are also sparking and heating up inside the light bulb in the microwave. The heat and pressure for the explosion comes from the sparking of the ‘Balls of Dilt’ within the ‘Crealites’ within the light bulb.

(This is very dangerous. Do not try this at home. Use only a controlled environment.)

Over pressurise an air tank

Another experiment you could use is to over pressurise an air tank. Whether it’s a scuba diving tank with compressed air or a gas tank with inert gas inside of it. If the tank is made strong enough, by over pressurising the tank an explosion will result instead of a rupture.

This is because the ‘Balls of Dilt’ within the ‘Crealites’ that makes up the gas, sparks under pressure and if there is enough sparking the tank will explode.

(This is very dangerous. Do not try this at home. Use only a controlled environment.)

Sparks from friction

There are some types of hard materials that are pliable enough, that if you were to hit them hard enough with another hard object or put pressure on them in some other way, you would end up making some of the three ‘Balls of Dilt’ within the ‘Crealites’ of the material touch each other again and create a spark. Such as metal on metal.

A perfect example of this is when a muffler falls down from it’s bracket on a car and scrapes along the ground as the car is moving, continually creating lots of sparks.

If you put enough pressure and heat on anything, sparks happen. This is a huge amount of supportive evidence that the ‘Balls of Dilt’ within the ‘Crealites’ are real and that they do exist.

This is because the steel that makes up the exhaust pipe must be able to change it’s shape under heat to be created in the first place. Then be able to melt down into the molten steel again to be made into any other shape. ‘Balls of Dilt’ within the ‘Crealites’ are the only things that have been shown in science with enough supportive evidence that can do this.

Electromagnetic energy never changes

Electromagnetic energy is electricity. We use electricity in our daily lives for power. Electricity is easy to control and manipulate because it operates under very strict basic principles and laws that cannot be over ridden without highly sophisticated equipment.

One of the main things we have learned about electromagnetic energy is the fact that it operates under the same basic principles and laws in both the sub-atomic level and the physical world, and it’s expansion rate is always limited to it’s own electromagnetic force of 2.25-1.

This means that electromagnetic energy always has a positive and a negative pole. These poles always either attract or repel. Also all objects no matter what size are affected by 'the rotating sea of flux lines of Space Saturation'.

This is clearly evident in the workings of sunlight, in the workings of a quark, in the workings of a super conductor made for super computers, in the workings of radio and micro waves, in the workings of a 12 volt car battery and in the workings of a Nuclear explosion.

In nature, from the very small to the very large, the basic principles and laws of electromagnetic energy never change. Every object in the universe has both an electromagnetic positive and an electromagnetic negative pole.

Electromagnetic energy is all there is

Electromagnetic energy is the only 'known force' that is both used and seen in both the sub-atomic level and the physical world. All other forces are just supposition.

In other words, there is no such thing as the strong force, the weak force or gravity.

Electromagnetic energy is all there is and comes in the form of

  • The rotating sea of flux lines of Space Saturation (level one)
  • All objects that form Space Saturation (level Two and level Three) which makes up all matter and all life
  • All magnets
  • Electricity, lightning, sparking and heat

Without electromagnetic energy nothing would exist. Everything that happens at the sub-atomic level with electromagnetic energy is calculable and predictable. There is no such thing as magic at the sub-atomic level.

Space Saturation causes the rotation of the planets, stars and galaxies including earth

The actual rotation of all objects in space from the small to the large including planets, stars, solar systems and galaxies is caused by the electromagnetic repulsion of 'the rotating sea of flux lines of Space Saturation' affecting the positive magnet poles of all of the ‘Balls of Dilt’ within the ‘Crealites’ of every individual ‘Crealite’ within every object in the universe.

As each ‘Ball of Dilt’ reaches the perimeter in it’s rotation within the ‘Crealite’ the positive magnetic fields of 'the rotating sea of flux lines of Space Saturation' repels the positive half of the ‘Ball of Dilt’ away and attracts the negative half of the ‘Ball of Dilt’ which touches the positive magnetic poles of 'the rotating sea of flux lines of Space Saturation'. This is the beginning of the spin and it continues from there to spin indefinitely.

As more ‘Crealites’ join to make a larger object, 'the rotating sea of flux lines of Space Saturation' puts pressure on every ‘Crealite’ to spin and when they can’t spin because of other ‘Crealites’ in the way, the pressure then affects the larger object but is always pushing the individual ‘Crealites’.

This explains why all objects rotate on an axis. This is also why all solar systems and galaxies and all objects within them remain operating in a disc shape. This is due to 'the rotating sea of flux lines of Space Saturation' being the cause of gravity in relation to every object attracting itself to a larger object. If a solar system or galaxy has been around long enough, the disc shape is well defined.

Deep sea creatures with bioluminescence

Down in the deepest depths of the oceans below 1000 meters, there are a countless number of biological creatures of all sizes that have the ability to light themselves up like the coloured bright lights of a city at night.

These creatures are operating in an environment that pressure is a natural part of their life. (more than 100 times the pressure that we experience on the surface). By utilising this pressure they are able to allow the ‘Balls of Dilt’ within certain parts of their bodies to touch each other and create light on cue, culminating in very exciting colourful light shows.

The pressure is all around them and all they do is control the amount of pressure within certain parts of their body to maintain these incredible light shows of colour, by distorting the light they create. The evidence supporting 'Dilt Movement Theory' is happening everywhere we look.

Most scientists believe that these sea creatures use chemical reactions to light themselves up, however, this is not true. They think these creatures can mix chemicals, then filter these chemicals and then re-use these chemicals in a time frame that defies belief.

Scientists have never found any chemicals in these creatures that are able to achieve what they believe.

In reality, these sea creatures use pressure and muscles to control the light show. By utilising and controlling this pressure very easily these biological creatures are able to allow the ‘Balls of Dilt’ within certain parts of their bodies to touch each other and create light on cue, culminating in very exciting light shows.

You can relate this pressure used with a diode. The pressure needed to make a simple diode light up for different colours (led) is only 2.25 - 1 in relation to the pressure of the Crealite.

You can also relate this pressure used with our voice box. Our voice box pressurises the air in our vocal wind pipe and causes the ‘Balls of Dilt’ within the ‘Crealites’ in the air we breathe to spark creating the wavelengths of electromagnetic energy we call sound waves.

Deep sea creatures with bio-luminescence give a lot of supportive evidence to ‘Dilt movement theory’ parts one and two’.

Proof with intent

I have just shown you many pieces of evidence to prove the existence of a ‘Crealite’ and to prove the existence of 'Dilt Movement Theory'. Now I will show you the ultimate evidence of the workings of a ‘Crealite’ by the controlling of the sparking in such a way that there can be no other explanation.

If ‘Crealites’ operated in the precise and exact same way that 'Dilt Movement Theory' explains, then I will be able to take a small amount of gas, contain it in a sealed glass container. Inject a small amount of electricity into it and watch it light up and become a very efficient source of light.

Gas light experiment

Using a gas light for the experiment as the ultimate proof.

Gas does not get used up. It is not a perishable item. However, when Space Saturation is allowed to happen, the gas does drift away and needs to be replaced.

If the gas is not allowed to drift away, it can be used to create heat and light indefinitely until it slows down the ‘Balls of Dilt’ enough to turn them into solid matter. This can be seen in an industrial gas powered light, where different gases are used to create light more efficiently than normal.

By using a very small injection of electromagnetic energy into the gas, gradually over a period of time the gas lights up as the ‘Balls of Dilt’ touch each other creating their sparks. The more sparking that occurs the brighter the light becomes.

One of the most common and efficient gases used for this purpose is mercury vapour. They make these High Tower lights with about one milligram of mercury and as the electricity is injected into the light the mercury off gases and produces a vapour. This vapour then slowly ignites and after a

while becomes a much brighter light than normal. By needing just a small amount of electricity to produce the light, these gas powered lights are some of the most energy efficient lights available for lighting large stadiums and large factories.

Some of the more recent types of lights like fluorescent lights now use stand alone gas and these lights were considered by some to be the most energy efficient lights ever invented, until the diode came along. The led light is the only thing more efficient.

There are some gases that are more volatile than others and cannot be used for this process, while there are others that are very efficient.

If you think about that for a moment, you’ll realise that gas is not a perishable item. Gas is only a perishable item when it is allowed to escape. Gas does not operate in the way science teaches us today and High Tower lights and fluorescent lights are the absolute and ultimate proof of that fact.

These lights and the other experiments I have shown you demonstrate without doubt the existence of 'Dilt Movement Theory' as being real. 'Dilt Movement Theory' is not an illusion and that 'Dilt Movement Theory' really does explain everything from the existence of light and matter, to electromagnetic energy itself.

Three dimensional hologram

The reason a three dimensional hologram cannot be created out of thin air is because there is nothing for the ‘Bright Parlites’ to hit and light up a surface. Without a surface for ‘Bright Parlites’ to hit and then spark, no vibrations are created and therefore no light is seen. Smoke, dust or other surfaces are required for a three dimensional hologram to be created.

This is more supportive evidence and proof of ‘Bright Parlites’. Because they must hit the surface of an object or there is no lighted object. In other words, as mentioned, a three dimensional hologram cannot be created out of thin air without a surface. However, upon doing an enormous amount of research to make a hologram work, there are some scientists on the verge of a breakthrough.

Possible Hologram Device

There could be a new process available soon to create holograms with a new device created by researchers from the Australian National University (ANU). Lead researcher Lei Wang, from ANU’s Research School of Physics and Engineering said, “We may be a step closer to achieving the development of a hologram device that gives the highest quality images to date.

The team published their research in the journal Optica.

Wang’s device is able to create high-quality hologram images in infrared, using “transparent metaholograms based on silicon metasurfaces. The device is made up of millions of tiny silicon pillars, which are up to 500 times thinner than human hair.

Proving the existence of the changing frequencies of the vibrating energy of the ‘Standard Crealites’

Now I would like to prove the existence of the changing frequencies of vibrating energy of the ‘Crealites’ within 'Dilt Movement Theory' and I can do this with colour.

In 1860 Pietro Angelo Secchi became the father of astrophysics. He was a pioneer in astronomical spectroscopy, and was one of the first scientists to state authoritatively that the sun is a star.

Father Secchi made contributions to many areas of astronomy.

However, his main area of interest was astronomical spectroscopy. He invented the Heliospectrograph, star spectrograph, and telespectroscope. He showed that certain absorption lines in the spectrum of the sun were caused by absorption in the earth's atmosphere.

Starting in 1863, he began collecting the spectra of stars, accumulating some 4,000 stellar spectrograms. Through analysis of this data, he discovered that the stars come in a limited number of distinct types and subtypes, which could be distinguished by their different spectral patterns.

From this concept, he developed the first system of stellar classification: the five Secchi classes.

While his system was superseded by the Harvard system, he still stands as discoverer of the principle of stellar classification, which is a fundamental element of astrophysics. His recognition of molecular bands of carbon radicals in the spectra of some stars made him the discoverer of carbon stars, which made one of his spectral classes.

He discovered that starlight was encoded with an abundance of information. By separating light into different colours, he could measure the chemical composition and the temperature of a star determining the elements it was made of.

This was one of the first understandings that colour represents our interpretation of the frequency of vibrating energy and later on that discovery led to more discoveries in finding other ways to

manipulate light and the vibrations which eventually led to the creation of colour as a use for colour television.

Colour television

• In 1928, John Logie Baird demonstrated the world's first colour transmission.

• In 1938 shadow mask technology for colour television was patented by Werner Flechsig in Germany.

• On August 16, 1944, John Logie Baird gave a demonstration of a fully electronic colour television display

Baird's’ Mechanical Television

Live Image used for the demonstration

His 600-line colour system used triple interlacing and with the help of six scan discs he built each picture by distorting electromagnetic energy creating the vibrations which then moved through 'the rotating sea of flux lines of Space Saturation'. Today using the simple diode, which creates colour by the distortion of electromagnetic energy is as easy as turning on a television set or a computer screen.

What we are really seeing because of the diode, is just energy vibrating at different speeds and frequencies and that we are seeing these things in the way that we do, because colour is put there by our brain to distinguish the different colours.

Remember, the 1967 Nobel prize in medicine was given to George Wald for proving that light, shadows and colours do not exist in the world around us. He proved that light, shadows and colours are simply our perception of the frequency (or 'electrical vibrations' of objects) of the energy of whatever we are looking at.

This means that John Logie Baird’s 600-line colour system using triple interlacing and with the help of those six scan discs, he built each picture by not distorting light, but distorting ‘Standard Crealites’, ‘Large and Hybrid Sub-Parlites’ and ‘Large, Bright and Hybrid Parlites’ to create differing speeds of the frequencies of the 'electrical vibrations' of objects of the energy of the surfaces we are looking at within the TV.

A television set or a computer is the absolute and final conclusive proof that colour does represent our interpretation of the frequency (or 'electrical vibrations' of objects) of vibrating electromagnetic energy.

A standard rainbow

It is the same thing that happens in a rainbow. With the sun behind us and the moisture in front of us, the distorting ‘Bright Parlites’ happen to create differing speeds of the frequencies of the 'electrical vibrations' of objects of the energy of the surfaces of the water droplets as they move through the flux lines of a magnetic field coming out of the ground.

Rainbows happen because the ‘Bright Parlites’ hit the intersecting moment in space and time when the magnetic field of our 3D vision meets the flux lines of the magnetic field of the ground at the exact same time that water droplets, mist or rain are passing through both magnetic fields.

These water droplets, mist or rain are being squeezed by the flux lines of the magnetic field from the ground as they are hit with the ‘Bright Parlites’. These water droplets, mist or rain then join and create the different vibrational speeds with the ‘Bright Parlites’, while at the same time our 3D vision can see these different vibrational speeds of the water as different colours.

A double or triple rainbow happens when there are two or more magnetic fields coming from the ground at the same time and are very close to each other. A rainbow only happens because we are looking at it and if you are travelling in a car and see a rainbow parallel to the road you are on, the rainbow will travel with you. If you are in a plane looking down to the ground and you see a rainbow directly below you, it could be in the shape of a full circle if you can see the full magnetic field emanating from the ground.

Fire & heat

If you were to take any type of solid matter and put enough heat to it, you can speed up the rotation and movement of the ‘Balls of Dilt’ again and recreate ‘Standard Crealites’, ‘Standard Sub-Parlites’ ‘Bright Parlites’ etc (all of the top seven levels of the first stage of expansion of electromagnetic energy as well as many of the components of Space Saturation level three, by releasing them from the matter they make up. It’s called ‘burning things up in a fire’.

This process is re-creating these ‘Bright Parlites’ etc in the exact same way as the sun.

When the heat becomes hot enough for the ‘Balls of Dilt’ to return to their optimum rotational speed and vibratory movement, they release ‘Bright Parlites’ and other particles that break away just like the ‘Bright Parlites’ are released from the sun. The hotter the fire, the faster the ‘Bright Parlites’ and other particles are released and breakaway from the fire.

As long as the heat is continually applied, these ‘Bright Parlites’ and other particles will continue to break away until there is nothing left. (leaving what we would call a disintegrated object or ash) and

the time it takes to disintegrate everything will depend on the qualities of the matter being heated. That is why lighting a fire will always create light. The hotter the fire, the brighter the light.

I would also like to point out that we don’t actually see the individual sparks that are created when the ‘Balls of Dilt’ touch each other. All we see is the combined effect of the many trillions of Crealites sparking at the same time and changing the vibrations of what is on fire back to different types of gases.

These gases in turn then burn creating the flames of the fire and as they break up into their components we see those vibrations through the sparking of the ‘Bright Parlites’ as they hit any surface of an object in the vicinity of the fire creating the higher speed frequency ‘electrical vibrations’ through 'the rotating sea of flux lines of Space Saturation'. Our brain then turns these vibrations into light, shadows and colours.